OCNED FRP Packaged Sewage Treatment Plant

The Fibre-Glass Reinforced Plastic (FRP) packaged sewage treatment plant is an Extended Aeration system which consists of an inlet primary screen chamber, pumping sump, secondary screen chamber, horizontal grit chamber, oil and grease chamber, aeration tank, sedimentation tank, sludge holding tank, control/blower room, disinfecting chamber and flow measuring chamber. The difference between FRP and RC extended aeration system is that tank are pre-fabricated in the factory using Fibre Reinforced Plastic (FRP) whereas the RC extended aeration system is cast at site using Reinforced Concrete.

In this treatment plant, raw sewage is discharged into the primary screen where an automatic mechanical coarse screen will be provided to remove coarse solid materials. The screened sewage will then flow to a wet well. the raw sewage will then be pumped to a secondary screen by a raw sewage pump. A mechanical fine screen will be provided in a secondary screen chamber to remove fine solid materials in the sewage. The screened sewage will then be discharged to a grit chamber for the removal of inert materials such as fine sand, gravel etc. Thereafter, the sewage will discharged to an oil and grease chamber for the removal of oil and grease.

After the pre-treatment processes, the sewage is then discharged to an aeration tank. A blower and diffusers are used to supply air to the tank continuously. After that, the treated sewage will be discharged to a secondary clarifier where the settlement process will separate both effluents (liquid) and waste (Sludge). The effluents will then be discharged to a disinfecting chamber before flowing to the nearest drain/river. A sludge-holding tank is also provided.

Pre-Fabricated FRP Sewage Treatment Plant One of the most cost effective biological sewage treatment plants for plant less than 1000PE and the treated effluents can achieve standard A

           The advantages of the pre-facricated FRP packaged sewage plan are :-

           a)  Cost savings for small plants (<1000 PE)

           b)  Easy installation and handling

           c)  Shorter construction period

           d)  Easy Maintenance

           e)  Saving of land area due to the compact system.

							Bungalow / Houses		Hostel
							Factory / Workshop		School
							Apartment / Condominium		Training Center
							Office Building		Hospital
							Hotel / Resort And Others		Golf Course

Ocned's Range of Ready Made Sewage Treatment Plant

	FRP TANK SEWAGE TREATMENT PLANT (ANEROBIC)	6 - 30 PE
	FRP TANK SEWAGE TREATMENT PLANT (AEROBIC)	50 - 1500 PE

NOTE:
1. AREA REQUIRED FOR THE ABOVE CAN BE RE-ARRANGED TO SUITE THE ACTUAL PROJECT SITE.
2. FRP SEWAGE TREATMENT PLANT BIGGER THAN 1000 PE ALSO AVAILABLE UPON REQUEST.

 

           Your best choice of solution to your Waste Water problem. We offer Compact, Reliable and Effective treatment which saves

           spare and simple in installation.

           OCNED's advantage is making the technology available and affordable for your requirement.